|Home||» Products||» Paint & Allied Products||» Epoxy Coating|
As a renowned entity, we are engaged in manufacturing and supplying high quality Epoxy Coating that is used to give long term protective and decorative properties to concrete and masonry surfaces. Our adept professionals utilize superior grade hydroxyl terminated polyol and iso-cyanate with latest technique to process this coating in accordance with set industry norms. In addition, our clients can easily get this Epoxy Coating in various packaging options at leading industry prices.
Longer shelf life
FIELD OF APPLICATION
All types of industries, Chemical industries, Pharmaceuticals and Food processing plants, Dairies, Breweries, Soft drink plants, Laboratories, Malls and Showrooms, Restaurants and Kitchens, Hospitals etc.
Theoretical Coverage at given D.F.T.
0.5 m2/ ltr.
Em-flor 40 P.U.SLF - Paint
5 parts by weight
Em-flor P.U. - Hardener
1 parts by weight
New concrete or cementitious substrates should have been placed for at least 28 days and should have moisture content less than 5%.
STANDARD COAT SYSTEMS
Primer (1~2 coat, approx.1000~200 ÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Â¼m),Em-flor 2K Epoxy primer.
Basecoat (1 coat, approx.1.5~3mm), Em-flor 40 - 2K PU self-leveling.
Pigment Topcoat (1~2 coat, approx.100~200 ÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Â¼m), Em-flor 83 2K W/B P.U.coating.
Colour chips (Optional)
Clear Topcoat (2 coat, approx. 200 ÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Â¼m), Em-flor 83 2K W/B coating. (Optional)
Floor wax (Optional)
Mix both components of epoxy primer Em-florl 8035-Resin and Em-flor 8036-Hardener in 2 : 1 proportion and immediately applied in a thin, continuous film using stiff brush or roller.
Porous floors may require two coats of primer.
Allow to dry to become tack free (approx. 4hr at room temp).
Em-flor 40 2k P.U. SLF APPLICATION
Em-flor 40 2k P.U. SLF is supplied in pre-weighed 2 components ready to use on site.
Mix Em-flor 40 P.U. SLF Paint (8040) and Em-flor P.U. ÃƒÆ’Ã‚Â¢ÃƒÂ¢Ã¢â‚¬Å¡Ã‚Â¬ÃƒÂ¢Ã¢â€šÂ¬Ã…â€œ Hardener (840H) carefully to avoid entrapping a lot of air and the electric stirrer is recommended. After mixing for about 3 min, add 840H hardener and mix again until homogeneous. Use slow speed electric stirrer for mixing components..
Em-flor 83 2k W/B P.U. APPLICATION
Mix 5 partsof floor coat with 1 part of Hardener by weight. Mix thoroughly to get homogeneous solution. Then add clean water to adjust consistency. After application allow to cure for 2-3 hrs, then apply 2nd coat. Allow to cure minimum 24 hours before the floor is trafficked.
Refer Product-Bulletin of Aquathene 83 2k P.U. Floor Coat.