Zinc Phosphate Primer

Get a Price/Quote

Zinc Phosphate Primer Trade Information

Minimum Order Quantity
50 Liters

Supply Ability
Liter

Delivery Time
3-4 Days

Sample Available
Yes

Sample Policy
Sample costs shipping and taxes has to be paid by the buyer

Packaging Details
Polybag

Main Domestic Market
All India

Certifications
ISO 9001: 2000 Certified Company

About Zinc Phosphate Primer

We are the renowned manufacturer and supplier of premium quality Zinc Phosphate Primer. It is a heavy duty protective primer recommended for protection of equipment, structural steel conveyors, etc. at moderate corrosive conditions in chemical and marine environments. The offered primer is precisely processed using premium quality chemicals and sophisticated technology in adherence to international quality standards. This zinc phosphate primer is an excellent anti corrosive primer for humid & coastal environment. In addition to this, the offered Zinc Phosphate Primer is packed in high quality material to ensure its purity for a longer period.

Features:

Accurate composition
Long shelf life
Resistant to acid
Safe to use

RECOMMENDED USAGE

Volume Solids	43+3 %
Mixing Ratio Base: Hardener	4 : 1 by volume
Recommended D.F.T.	30 - 45 microns
Theoretical Coverage at given D.F.T.	9.0-14.0 m²/ltr

Technical Specifications

Type	Two Pack
Color	Grey
Gloss	Matt
Induction Time	30-45 mins
Pot Life	6 -8 hrs. at 30^oC
Curing Mechanism	Solvent release and chemical reaction between Base and Hardner
Flash Point	Not below 25^oC
Drying Time(30^oC)
Surface Dry	20 - 30 minutes
Hard Dry	16 - 18 hours.
Curing Time	7 days
Recoating Interval	Min 16 hrs. Max 5 days
Thinner	Emperol Epoxy Thinner
Suitable Overcoating	Chlorinated Rubber,Epoxy or Polyurethane coating.
Applied over	Blast cleaned M.S.surface.
Application Method	Brush / Conventional spray
Shelf Life	12 months under normal storage conditions in original sealed container.

SURFACE PREPARATION

Before application of the primer, all surface must be clean, dry and free from mill scale. Blast cleaning to Sa 2.5 grade of international standard to ISO 8501/1: 1988 is the only satisfactory method of preparing steel surfaces. Manual or mechanical chipping, scraping, and wire brushing to St - 3 grade of international standard is recommended only where blast cleaning is not feasible.

SPECIAL INSTRUCTION

Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. Surface temperature must be 3^oC above Dew Point to prevent condensation.
Temperature

Air: 5 - 40^oC
Surface: 5 - 50^oC

Tell us about your requirement