|Home||» Products||» Paint & Allied Products||» Self-Leveling Epoxy Floor Coating|
Our proficiency in this domain enables us to offer our clients an excellent quality Self-Leveling Epoxy Floor Coating. The offered coating is formulated under the guidance of skilled professionals utilizing high grade chemicals at par with international quality standards. It can be used in dairies, soft drink production and bottling plants, food processing plants, breweries, pharmaceutical industries, production assembly areas, showrooms, aircraft hangers, kitchens, clean rooms, computer rooms, automobile / engineering industries etc. Moreover, our customers can avail this Self-Leveling Epoxy Floor Coating from us at highly affordable rates.
Easy to clean
Longer shelf life
Em-flor SLF gives smooth, attractive flooring having excellent adhesion to concrete which is solvent free, giving good chemical and abrasion resistance, easy to clean and does not support bacterial growth.
FIELD OF APPLICATION
It can be used in production assembly areas, dairies, soft drink production and bottling plants, food processing plants, breweries, pharmaceutical industries, kitchens, showrooms, aircraft hangers, clean rooms, computer rooms, automobile / engineering industries etc.
COMPONENTS & MIXING
Em-flor SLF Resin
100 parts by weight
Em-flor SLF Hardener
56 parts by weight
Epoxy Colour Paste
5 parts by weight
200 parts by weight
All surface must be sound, clean, dry, free from oil, grease cement laitance and all loose adhering particles.
Mix both components of epoxy primer Emperol 8035-Resin and Emperol 8036-Hardener in 2 : 1 proportion and immediately applied in a thin, continuous film using stiff brush or roller.
Porous floors may require two coats of primer.
Allow to dry to become tack free (approx. 4hr at room temp). then apply Em-flor SLF.
For trolley movement, screed application is essential.
For 1 to 2 tons trolley movement -1mm screed + 1mm Em-flor SLF &
For 2 to 3 tons trolley movement 2 mm screed + 1 mm Em-flor SLF is ideal.
Mixing ratio of screed is
Emperol 8035-Resin + Emperol 8036 Hardener + Aggregate Sand
2 parts by wt. + 1 part by wt. + 6 parts by wt. = 1 mm screed
2 parts by wt. + 1 part by wt. + 12 parts by wt. = 2 mm screed
Em-flor SLF APPLICATION
Em-flor SLF is supplied in pre-weighed 4 components ready to use on site. Use slow speed electric stirrer for mixing components. One kit of Em-flor SLF covers 10 sq.mt.- 1mm thickness area.
First mix Em-flor SLF Resin (Product Code - 8030-0000) with Epoxy Colour Paste in a mixing vessel until uniform colour is obtained. Then add Em-flor SLF Hardener (Product Code - 8031-0000) and stir well. Finally add Aggregate Filler and stir until homogeneous mixture is obtained. Spread Em-flor SLF mixture on the prepared surface by using toothed trowel or comb. After about 10mins., remove entrapped air by using spiked roller. Allow floor topping to cure for 2 to 7 days. Thickness of the topping can be adjusted from 1mm to 2mm by using appropriate size trowel.
In certain conditions, a light oily film may appear on the surface of the floor on curing. This may be easily removed after a minimum curing period of 48hrs, by washing with a liquid detergent floor cleaner and water.
For application on steel substrates, consult Emperol.