Cookie Img
Translate In : View in English View in Spanish View in French View in German View in Italian View in Chinese (Simplified) View in Japanese View in Korean View in Arabic View in Portuguese
 
 
 
  
 
Our Products
Paint & Allied Products
Floor Coatings
Wall Coatings
Speciality Products
 
Trust Stamp
Product Showcase
 
 
 
Home » Products » Paint & Allied Products » Finish Paint

Finish Paint



<< Previous   Finish Paint   Next >>
Product Description

EP 4 Epoxy Finish Paint

PRODUCT  DESCRIPTION

EP-4 Epoxy Finish Paint is an epoxy top coat recommended for application on metal and concrete surfaces after proper surface preparation, priming etc. it is a pigmented epoxy binder with separate polyamide hardner. This coating provides excellent adhesion and much higher degree of protection against natural weather, highly corrosive and humid atmospheres.

RECOMMENDED USAGE

As a heavy duty finishing coat on structural steel and concrete in industrial atmosphere, such as paper mills, chemical plants, fertilizer plants, breweries, refineries, thermal power plants, atomic energy establishments, etc.

 

Volume Solids

40+3 %

Mixing Ratio
Base: Hardner

4 : 1 by volume

Recommended D.F.T.

35 - 40 microns

Theoretical Coverage at given D.F.T.

10-11 m2/ltr

Technical Specifications

Type

Two Pack

Colour

Desired shades.

Gloss

Glossy

Induction Time

30 – 45 mins.

Pot Life

6 - 8 hrs. at 30oC

Curing Mechanism

Solvent release and chemical reaction between Base and Hardner

Flash Point

Not below 25oC

Drying Time(30oC)


Surface Dry

Max 2 hrs

Hard Dry

16 - 18 hrs.

Full Cure

7 days

Recoating Time

Min 16 hrs.

Thinner

Emperol Epoxy Thinner

Thinner Consumption


Brush / Roller

0 - 5 %

Conventional Spray

5 - 10 %

Airless Spray

0 - 5 %

Applied Over

Epoxy primed surface.

Application Method

Brush / conventional / Airless spray.

Shelf Life

12 months in a sealed container under normal storage conditions.

SURFACE PREPARATION

Primed surface must be clean, dry, free from moisture and other contaminants.

SPECIAL INSTRUCTION

Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition, porosity of the concrete etc., and varies upto 50% and 60%.

Surface temperature must be 3oC above Dew point to prevent condensation.
Temperature 

Air: 5 - 40oC
Surface:  5 - 50
oC

Product Code : 18


EMPEROL COLOURS PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

Other Products in 'Paint & Allied Products' category
Coal Tar Epoxy Paint
Coal Tar Epoxy Paint
MultiPurpose Epoxy Coating
MultiPurpose Epoxy Coating
Primer Surfacer
Primer Surfacer
N.C Putty
N.C Putty
Zinc Rich (80)
Zinc Rich (80)
Epoxy Polyamide Primer
Epoxy Polyamide Primer
 
View all products(25)
 
<< Back


"We are mainly dealing with bulk quantity order inquiries."




EMPEROL COLOURS PVT. LTD. EMPEROL COLOURS PVT. LTD.
168/4708, Naidu Colony, Ghatkopar (E), Mumbai - 400075, Maharashtra, India
Send Inquiry   Send SMS   
Key Personnel
Mr. Kishan Shrimali (Managing Director)
Mr. Sharad Soman (General Manager (Technical Services))


Translate In : View in English View in Spanish View in French View in German View in Italian View in Chinese (Simplified) View in Japanese View in Korean View in Arabic View in Portuguese
EMPEROL COLOURS PVT. LTD. All Rights Reserved.